Comparison
40 vs 50 gallon water heater
Tank size is the number on the box. First-hour rating is the number that tells you how many showers in a row you get.
40 vs 50 gallon water heater is less about the tank than its first-hour rating. The federal test defines first-hour rating as an estimate of the most hot water a full tank can deliver in an hour, and it can exceed the tank size because the burner keeps reheating. One maker rates a 40 gallon gas model at 75 gallons in the first hour.
So two 40 gallon heaters can deliver different amounts, and a fast-recovering 40 gallon tank can outperform a slow 50. Compare the first-hour rating on the yellow EnergyGuide label. The water heater sizing calculator estimates your own peak hour.
40 gallon vs 50 gallon: side-by-side table
Rating facts from the DOE test procedure (10 CFR 430, Appendix E), the FTC EnergyGuide rule and a manufacturer’s specification sheet.
| Factor | 40 gallon | 50 gallon |
|---|---|---|
| Stored water | About 40 gallons nominal | About 50 gallons nominal |
| First-hour rating | Varies by model and fuel; read the label | Varies by model and fuel; read the label |
| Draw pattern in the federal test | Assigned by the heater’s own first-hour rating | Same |
| Footprint | Smaller | Larger and heavier when full |
| Standby heat loss | Less surface area | More surface area |
| Label to compare | EnergyGuide: first-hour rating and yearly energy use | Same |
When a 40 gallon tank is the right call
A 40 gallon tank fits when its first-hour rating covers your busiest hour and space is tight.
- A peak hour your sizing estimate puts at or below the model’s first-hour rating.
- A closet or alcove sized for the old tank.
- A household that staggers showers.
When a 50 gallon tank is the right call
A 50 gallon tank fits when your busiest hour runs past what a 40 gallon model can deliver.
- Back-to-back showers in the morning, plus laundry or a dishwasher.
- A large soaking tub.
- A heat pump model, which ENERGY STAR’s guide notes is often sized up when replacing gas.
Check the space and the connections
A larger tank needs room, a floor that carries its weight, and connections that fit. Whether a bigger tank changes venting, gas supply or electrical needs is a question for a licensed plumber and your building department, not this page.
What moves the cost of either
What moves the price is the model and the install, more than ten gallons of tank.
- Fuel and type: gas, electric or heat pump.
- First-hour rating and efficiency of the chosen model.
- Fit: whether the bigger tank needs changes to the space or connections.
- Permit, inspection and haul-away.
HyrePlumber publishes no prices for this work until it holds enough sourced, dated quotes. See how plumbing is priced, check a bid with the plumbing quote checker, and read how to choose a plumber before you hire.
Sources
- 10 CFR Part 430, Subpart B, Appendix E, via Cornell LII, Uniform Test Method for Measuring the Energy Consumption of Water Heaters. Retrieved October 13, 2026.
- 16 CFR 305.17, via Cornell LII, Energy Labeling Rule: water heater labels. Retrieved October 13, 2026.
- Bradford White (manufacturer), distributor copy, RG140T6X Residential Atmospheric Vent Gas Water Heater specification sheet. Retrieved October 13, 2026.
- ENERGY STAR, Best Practices: Installing Heat Pump Water Heaters (2024). Retrieved October 12, 2026.
Questions people ask
Is a 40 gallon water heater enough for a family of four?
What is the first-hour rating?
Why can a 40 gallon tank deliver more than 40 gallons?
Does a bigger tank cost more to run?
Related
- Water heater installation What the install includes.
- Water heater repair and replacement The water heater category page.
- Water heater first-hour rating How the rating is tested.
- Water heater sizing calculator Estimate your peak hour.
- Home warranty vs plumbing service plan