HyrePlumber

Plumbing services

Copper repipe

Copper is a long-proven pipe. Whether it is the right one depends on your water.

Updated August 16, 2026

Find a Local Plumber What it costs

Written by HyrePlumber Research Desk Primary-source research and fact checking

The short answer

A copper repipe replaces a home’s old supply pipes, often galvanized steel or failing older copper, with new copper tubing joined with lead-free solder or press fittings. It is chosen for its long track record, but aggressive water can cause pinhole leaks, so test the water before choosing it.

Is a copper repipe the right choice?

Copper suits many homes,

especially where it is the local norm and the water is not corrosive.

Water chemistry matters

Low pH water can corrode copper. EPA lists pH among the tests for well owners.

Compare with PEX

See PEX repipe and pipe materials.

Find a local plumber for copper repipe

Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.

What does a copper repipe involve?

Most of the work is opening and closing walls.

01
Plan the routes

Runs are mapped to limit wall and ceiling openings.

02
Open access

Small cuts in drywall at fixtures and runs.

03
Run new copper

Joined with lead-free solder or press fittings.

04
Pressure test

The system is tested before walls are closed. See pressure test.

05
Patch

Ask whether drywall repair is included.

Copper or PEX for a repipe?

The choice is about your house and water, not a winner for everyone.

FactorWhat to weigh
Water chemistryCopper can suffer pinhole leaks in some water.
Install methodRigid copper takes more wall openings than flexible PEX runs.
Freeze toleranceRigid copper can split when frozen.
Exposed runsCopper handles sunlight and heat near water heaters well.

What moves the price of a copper repipe?

Use the repipe cost estimator and see plumbing costs.

FactorWhy it changes the number
House size and fixturesMore bathrooms, more pipe.
Copper type and fittingsPipe grade and press vs solder affect labor.
AccessSlab homes and finished basements are harder.
Drywall repairOften a separate line item.

HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.

What to ask before you sign

Why copper for my house

over PEX?

What type of copper

and joint method will you use?

Is drywall patching included?
Who pulls the permit?

Most places require one for a repipe.

Where this goes wrong

Skipping a water test

Corrosive water can shorten copper’s life.

Mixing metals without a fitting

Copper joined to steel without a dielectric union can corrode.

Your inquiry

Tell us about the plumbing

Nothing goes to a plumbing company unless you agree.

A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.

Find a Local Plumber

Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.

Your details

We reply to every inquiry. Nothing is passed on to anyone you have not asked us to contact.

Questions

How long does a copper repipe take?
It depends on the house. Ask each bidder for a timeline including patching.
Is copper pipe safe for drinking water?
Copper is widely used for drinking water. Corrosive water can raise copper levels; EPA suggests testing for pH, lead and copper when corrosion is a concern.
Can I repipe only part of the house?
Yes, partial repipes are common. See repiping.

Written and audited by

HyrePlumber Research Desk

Primary-source research and fact checking

We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.

Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.

32
source documents linked from these pages
10
government (.gov) domains among them
0
national average prices published without a source
0
plumbing jobs we perform

How this desk works

  • Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
  • Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
  • Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
  • Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
  • We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.

Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.

Sources & retrieval dates

Protect Your Home’s Water (corrosion testing), US Environmental Protection Agency. Retrieved 2026-10-26.

Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.

HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.

This page explains the work so you can judge a quote and a plumber.