HyrePlumber

Plumbing services

Leaky faucet repair

A drip is small. Over a year it adds up, and the fix is often one part.

Updated August 16, 2026

Find a Local Plumber What it costs

Written by HyrePlumber Research Desk Primary-source research and fact checking

The short answer

Leaky faucet repair means replacing the worn part inside a dripping faucet, usually a cartridge, washer, seat or O-ring, depending on the faucet type. EPA says a faucet dripping once per second can waste more than 3,000 gallons a year.

What causes a leaky faucet?

Drip from the spout

a worn cartridge, washer or seat.

Leak at the handle or base

worn O-rings or seals.

Know the brand

Cartridges are often brand-specific.

Find a local plumber for leaky faucet repair

Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.

What does a leaky faucet repair involve?

Most repairs are done at the sink in one short visit.

01
Shut off the water

At the stop valves under the sink.

02
Take the handle off

To reach the cartridge or stem.

03
Replace the worn part

Matched by brand and model.

04
Reassemble and test

Check for drips and leaks at the base.

Which faucet type do you have?

The type sets which part wears and how it is fixed.

TypeWhat usually wears
Compression (two handles that tighten down)Rubber washers and seats.
CartridgeThe cartridge and its O-rings.
Ball (single handle, older kitchens)Seats, springs and the ball.
Ceramic discSeals; the discs are durable but can crack.

What moves the price of a leaky faucet repair?

See plumbing costs.

FactorWhy it changes the number
Part availabilityOld or rare faucets may need special parts.
CorrosionSeized parts take longer.
Stop valvesValves that will not close may need replacing first.

HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.

What to ask before you sign

Is this faucet worth repairing?
Are parts available

for this brand?

Is the valve seat damaged?

Where this goes wrong

Over-tightening the handle

It can crush washers and make the drip worse.

Buying the wrong cartridge

Take the old one to the store or find the model.

Your inquiry

Tell us about the plumbing

Nothing goes to a plumbing company unless you agree.

A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.

Find a Local Plumber

Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.

Your details

We reply to every inquiry. Nothing is passed on to anyone you have not asked us to contact.

Questions

How much water does a dripping faucet waste?
EPA WaterSense says: “A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year.” Use the leak cost calculator for your rate.
Should I repair or replace a leaky faucet?
Repair if parts are available and the body is sound. Replace if it is corroded or parts are hard to find. See faucet installation.
Can I fix a leaky faucet myself?
Many owners do. Call a plumber if the stop valves will not close or parts are stuck.

Written and audited by

HyrePlumber Research Desk

Primary-source research and fact checking

We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.

Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.

32
source documents linked from these pages
10
government (.gov) domains among them
0
national average prices published without a source
0
plumbing jobs we perform

How this desk works

  • Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
  • Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
  • Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
  • Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
  • We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.

Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.

Sources & retrieval dates

Fix a Leak Week, US Environmental Protection Agency, WaterSense. Retrieved 2026-10-26.

Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.

HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.

This page explains the work so you can judge a quote and a plumber.