Plumbing services
Reverse osmosis system installation
An RO system treats drinking water at one tap. It suits some water problems and not others.
Find a Local Plumber What it costs
Written by HyrePlumber Research Desk Primary-source research and fact checking
The short answer
Reverse osmosis system installation means fitting an under-sink unit that pushes water through a fine membrane and prefilters, storing treated water in a small tank and sending a dedicated faucet to the sink. It needs a cold water connection, a drain connection for reject water, and cabinet space.
What should you settle before an RO system goes in?
RO reduces many dissolved substances, but you should know what you are treating.
to reduce the contaminant you care about. EPA offers a tool to find filters certified to reduce lead.
Ask the maker’s ratio.
Find a local plumber for reverse osmosis system installation
Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.
What does a reverse osmosis installation involve?
Most installs are under the kitchen sink.
Room for the filter housings and storage tank.
A feed valve is added to the cold line.
A hole in the sink or counter for the RO tap, if none exists.
A drain saddle on the sink drain for reject water.
The system is flushed and checked for leaks.
Is reverse osmosis the right treatment?
State health departments and extension services describe where RO fits.
| Water issue | Where RO stands |
|---|---|
| High dissolved solids or salty taste | A common reason to choose RO. |
| Specific contaminants (e.g., nitrate, lead) | RO can reduce some; check the unit’s certification for that one. |
| Bacteria in a well | RO is not a disinfection system. See your health department. |
| Hardness throughout the house | A softener, not RO. See water softener repair. |
What moves the price of an RO installation?
See plumbing costs.
| Factor | Why it changes the number |
|---|---|
| System type | Tank vs tankless and number of stages. |
| Counter material | Stone counters need special drilling. |
| Fridge or ice maker line | Extra tubing and fittings. |
| Ongoing filters | Prefilters and membranes need replacing. |
HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.
What to ask before you sign
per gallon made?
Where this goes wrong
Old filters stop working and can foul the membrane.
Bacteria in well water need a different fix and testing.
Your inquiry
Tell us about the plumbing
Nothing goes to a plumbing company unless you agree.
A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.
Find a Local Plumber
Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.
Questions
Do I need a whole house filter or RO?
Should well owners test before RO?
Can RO connect to a fridge?
Written and audited by
HyrePlumber Research Desk
Primary-source research and fact checking
We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.
Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.
- 32
- source documents linked from these pages
- 10
- government (.gov) domains among them
- 0
- national average prices published without a source
- 0
- plumbing jobs we perform
How this desk works
- Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
- Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
- Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
- Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
- We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.
Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.
Sources & retrieval dates
Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.
HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.
This page explains the work so you can judge a quote and a plumber.