HyrePlumber

Plumbing services

Sump pump repair

A pump that stops working is often fine. Something around it has failed.

Updated August 16, 2026

Find a Local Plumber What it costs

Written by HyrePlumber Research Desk Primary-source research and fact checking

The short answer

Sump pump repair means fixing the part that stops an existing pump from emptying its pit, most often a stuck float switch, a failed check valve, a blocked or frozen discharge line, or lost power. If the motor itself has failed, replacement is usually the better call.

If this is happening now

If water is rising in the basement near outlets, cords or the electrical panel, stay out of the water. Do not unplug or handle the pump while standing in water. Call the utility or an electrician to cut power safely.

What should you check before calling about a sump pump?

Power first

A tripped outlet or breaker stops the pump cold.

Watch the float

A float jammed against the pit wall never tells the pump to start.

Look outside

A frozen or crushed discharge line makes the pump run without moving water.

Find a local plumber for sump pump repair

Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.

What are the signs a sump pump needs repair?

Listen and watch during the next rain. The behavior points to the part.

Water in the pit but no sound

from the pump.

The pump runs nonstop

even when the pit is low.

The pump starts and stops

every few seconds.

Loud grinding or rattling

while it runs.

Water falling back

into the pit after the pump stops.

What does each symptom usually mean?

These are the common links between what you see and the failed part.

SymptomLikely cause
Silent with a full pitNo power, a stuck float, or a burned-out motor.
Runs but pit stays fullBlocked intake, a frozen discharge line, or a worn impeller.
Short cyclingA failed check valve or a float set too tight.
Runs constantly in dry weatherA stuck float switch, or groundwater that is higher than you think.

What does a sump pump repair involve?

Most repairs take place at the pit with the pump lifted out.

01
Test power and the float

The pro checks the circuit and whether the switch triggers the pump.

02
Clean the pit and intake

Silt and debris that jam floats and screens are removed.

03
Check the discharge

The check valve and the outside line are checked for blockage or ice.

04
Repair or replace

If the motor is gone, see sump pump replacement.

What moves the price of a sump pump repair?

We explain the factors in words. See plumbing costs.

FactorWhy it changes the number
The failed partA float switch or check valve is a small part. A motor usually means a new pump.
TimingCalls during a storm or at night cost more.
Discharge workRe-routing or burying a line adds labor.

HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.

What to ask before you sign

Which part failed,

and how did you confirm it?

How old is the pump,

and is repair worth it at this age?

Is the check valve working?
Would a backup pump help here?

Where this goes wrong

Testing only in dry weather

Pour water into the pit to see the full cycle before the storm.

Ignoring the discharge outlet

Ice or debris at the outside end makes a good pump look broken.

Your inquiry

Tell us about the plumbing

Nothing goes to a plumbing company unless you agree.

A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.

Find a Local Plumber

Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.

Your details

We reply to every inquiry. Nothing is passed on to anyone you have not asked us to contact.

Questions

How do I test a sump pump?
Slowly pour a bucket of water into the pit. The float should rise and start the pump, and the pump should empty the pit and stop. If it does not, note what happened for the technician.
Is it worth repairing an old sump pump?
A float or check valve is often worth fixing. If the motor has failed on an older pump, replacing the whole unit is usually more sensible.
What happens to my sump pump in a power cut?
A plug-in pump stops. Ready.gov suggests considering a sump pump with a battery. See battery backup sump pump installation.

Written and audited by

HyrePlumber Research Desk

Primary-source research and fact checking

We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.

Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.

32
source documents linked from these pages
10
government (.gov) domains among them
0
national average prices published without a source
0
plumbing jobs we perform

How this desk works

  • Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
  • Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
  • Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
  • Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
  • We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.

Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.

Sources & retrieval dates

Floods: prepare, Ready.gov (FEMA). Retrieved 2026-10-26.

Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.

HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.

This page explains the work so you can judge a quote and a plumber.