Plumbing services
Slab leak repair
There is more than one way to fix a leak under concrete, and opening the floor is not always the best.
Find a Local Plumber What it costs
Written by HyrePlumber Research Desk Primary-source research and fact checking
The short answer
Slab leak repair fixes a water supply line leaking beneath a concrete floor.
The leak is found first, then fixed one of three ways: break the slab and repair that spot, abandon the line and reroute a new one through walls or attic, or repipe the house. The pipe's age and history decide which makes sense.
How do you choose a slab leak repair method?
a spot repair through the slab can be reasonable.
rerouting often avoids chasing the next leak under the floor.
a repipe may be the honest answer.
Find a local plumber for slab leak repair
Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.
Which slab leak repair route fits?
| Route | Trade-off |
|---|---|
| Direct (spot) repair | Fixes only the leak found. Means cutting flooring and concrete, then patching. |
| Reroute | A new line runs above the slab and the leaking one is abandoned. Means opening some walls or ceilings instead. |
| Repipe | Replaces the whole supply system. The biggest job, but ends repeat leaks from aging pipe. |
What are the signs of a slab leak?
if the hot line is leaking.
with every fixture off.
when nothing is on.
without a change in use.
What does slab leak repair involve?
Pressure tests and listening or thermal tools narrow it down. See water leak detection.
Spot, reroute or repipe, based on pipe age and history.
Cut and repair, or run new line above the slab.
A pressure test confirms the system holds before anything is closed up.
What moves the price of slab leak repair?
We publish no figures. See plumbing costs and the leak cost calculator for the water side.
| Factor | Why it changes the number |
|---|---|
| Route chosen | Rerouting and repiping cover more pipe than a spot repair. |
| Flooring | Tile, hardwood or stone over the leak make cutting and restoring harder. |
| Detection | Locating the leak is often priced separately. |
| Restoration | Drywall and floor repair are often separate trades. |
HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.
Ask how many more leaks this pipe has in it.
One pinhole in old copper is often followed by another. If the plumber expects more, rerouting or repiping may cost less over time than repeat spot repairs.
What to ask before you sign
hot or cold?
rather than the other two?
and who restores it?
for this work?
the repair or the line?
What to have ready
with all fixtures off, and again an hour later.
showing the change.
if known.
Where this goes wrong
EPA WaterSense notes that household leaks can waste thousands of gallons a year; under a slab, they also wet the soil and concrete.
Spot repair and reroute quotes look very different. Compare the route, not only the total.
Your inquiry
Tell us about the plumbing
Nothing goes to a plumbing company unless you agree.
A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.
Find a Local Plumber
Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.
Questions
Is a slab leak an emergency?
Does homeowners insurance cover slab leaks?
Can a slab leak fix itself?
Written and audited by
HyrePlumber Research Desk
Primary-source research and fact checking
We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.
Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.
- 32
- source documents linked from these pages
- 10
- government (.gov) domains among them
- 0
- national average prices published without a source
- 0
- plumbing jobs we perform
How this desk works
- Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
- Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
- Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
- Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
- We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.
Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.
Sources & retrieval dates
Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.
HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.
This page explains the work so you can judge a quote and a plumber.