Plumbing services
Water leak detection service
Finding the leak is a separate skill from fixing it. Pay for an answer, not for holes.
Find a Local Plumber What it costs
Written by HyrePlumber Research Desk Primary-source research and fact checking
The short answer
A water leak detection service locates hidden leaks in supply lines inside walls, under slabs or in the yard, using pressure tests, acoustic listening gear, thermal cameras and moisture meters.
The goal is to pinpoint the leak so only a small area is opened. You can confirm a leak exists yourself with the water meter first.
What should you do before calling leak detection?
Turn off every fixture and see whether the meter or its leak indicator still moves.
A worn flapper is a common silent leak, and EPA WaterSense says it can waste thousands of gallons a year.
with the meter result and where you suspect the water is going.
Find a local plumber for water leak detection service
Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.
When do you need a water leak detection service?
with everything off.
with no visible pipe.
along the service line in dry weather.
Which leak sources get confused?
| Symptom | Often the real source |
|---|---|
| Meter moves slowly | A running toilet, before any hidden pipe. |
| Wet ceiling under a bathroom | A shower pan or drain, not the supply line. Drains are not under pressure, so a pressure test can miss them. |
| Wet yard near the street | The service line, which may be yours or the utility's depending on the side of the meter. |
How does a leak detection visit work?
Shut valves to split the system and see which part loses pressure. See leak isolation.
Acoustic gear picks up the sound of water escaping a pressurized pipe.
Thermal cameras show hot-line leaks; moisture meters map wet areas.
The spot is marked, ideally with a written report you can hand to whoever repairs it.
What moves the price of leak detection?
We publish no figures. See plumbing costs.
| Factor | Why it changes the number |
|---|---|
| Where the leak is | Slab and yard leaks take more equipment than wall leaks. |
| Home size | More pipe means more ground to cover. |
| Report | A written report for insurance may cost extra. |
HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.
Ask whether detection and repair are priced separately.
A company that only locates has no stake in the repair route. A company that does both can save a visit. Either is fine if the price is clear.
What to ask before you sign
for a leak in this location?
Is there still a charge?
or do I hire someone else?
What to have ready
with everything off.
showing the change in use.
with photos.
Where this goes wrong
Water travels along framing; the wet spot is often not where the pipe leaks.
Paying for detection to find a flapper is an expensive way to find a cheap part.
Your inquiry
Tell us about the plumbing
Nothing goes to a plumbing company unless you agree.
A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.
Find a Local Plumber
Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.
Questions
How much water can a hidden leak waste?
Can a leak detection company find leaks under a slab?
Do smart leak sensors replace a detection service?
Written and audited by
HyrePlumber Research Desk
Primary-source research and fact checking
We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.
Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.
- 32
- source documents linked from these pages
- 10
- government (.gov) domains among them
- 0
- national average prices published without a source
- 0
- plumbing jobs we perform
How this desk works
- Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
- Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
- Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
- Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
- We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.
Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.
Sources & retrieval dates
Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.
HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.
This page explains the work so you can judge a quote and a plumber.