HyrePlumber

Plumbing services

Well pump replacement

A new pump has to suit the well you have: its depth, its yield and the house it feeds.

Updated August 16, 2026

Find a Local Plumber What it costs

Written by HyrePlumber Research Desk Primary-source research and fact checking

The short answer

Well pump replacement means removing a failed jet or submersible pump and fitting a new one matched to the well depth, the well’s yield and the household’s demand. The job often includes the check valve, wiring and pressure controls, so ask for those to be listed in the quote.

What decides a good well pump replacement?

Confirm the pump really failed

Tanks and switches fail more often. See well pump repair.

The well sets the pump

Shallow wells can use a jet pump above ground; deep wells use a submersible pump in the casing.

Retest the water afterwards

EPA advises a test whenever any part of the well system is replaced.

Find a local plumber for well pump replacement

Free, with no obligation. A person at HyrePlumber replies by email. Matching with plumbing companies is not live yet.

What does a well pump replacement involve?

For a submersible pump, most of the work is getting the old one out safely.

01
Confirm the diagnosis

Amp draw, flow and control tests show the pump is the fault.

02
Pull the pump

Pipe, wire and safety rope are lifted out, often with a pump hoist.

03
Inspect what came up

Worn wire, a cracked drop pipe or a failed check valve are replaced while the system is open.

04
Set the new pump

The new pump is matched to depth and demand, then lowered and wired.

05
Disinfect and test

Ask whether the well will be disinfected, and plan a lab water test.

Jet pump or submersible pump: which fits your well?

The well’s depth, not preference, usually makes the choice. Extension guides describe both types.

Pump typeWhere it fits
Shallow-well jet pumpSits above ground and pulls water up from a shallow well. Easy to reach for service.
Deep-well jet pumpAbove ground with a jet assembly down the well. Found on older systems.
Submersible pumpSits down in the well casing and pushes water up. Common on drilled wells.

What moves the price of a well pump replacement?

We do not publish figures without enough sourced quotes. See plumbing costs.

FactorWhy it changes the number
Pump type and sizeSubmersible pumps and higher demand cost more than a small jet pump.
DepthMore pipe and wire, and more time to pull and set.
Extra partsDrop pipe, wire, check valves, the pressure switch and the tank.
ControlsConstant-pressure controllers are a separate choice from a standard switch.

HyrePlumber publishes no national average price for this work. Regional labor rates, access, pipe material and permit fees move it far enough that a single figure would mislead.

What to ask before you sign

How did you size the new pump?

What depth and flow did you use?

What else is being replaced,

and is it on the quote?

What is the pump warranty,

and does labor count?

Will you disinfect the well,

and when should I test the water?

What to have ready

The well log

if you have it: depth, yield and casing size.

The old pump’s label

or model, if it is visible.

How many people and fixtures

the well supplies.

Where this goes wrong

Oversizing the pump

A pump that moves more water than the well yields can draw it down and run dry.

Reusing worn parts

An old check valve or splice can fail soon after, and the pump comes up again.

Ignoring the tank

A failing pressure tank shortens the new pump’s life.

Your inquiry

Tell us about the plumbing

Nothing goes to a plumbing company unless you agree.

A person reads it and replies by email, free and with no obligation. Matching is not live yet, so this is not a quote or a dispatch line. Water running? Shut off the main. Smell gas? Leave, then call 911 or the gas utility.

Find a Local Plumber

Three short steps: the problem, your home, and how to reach you. A person at HyrePlumber reads it and replies.

Your details

We reply to every inquiry. Nothing is passed on to anyone you have not asked us to contact.

Questions

How do I know the well pump needs replacing, not repair?
A technician should test power, the switch and the tank first. If those check out and the pump draws abnormal current or moves no water, replacement is likely.
Can a well pump be replaced in one day?
Many replacements are finished in a day when the part is in stock, but deep wells and access problems can stretch it. Ask for a time estimate.
Do I need a permit to replace a well pump?
Rules vary by state and county. Ask your local health department or building department before the work.
Should the pressure tank be replaced too?
Not always. Have it tested; see well pressure tank replacement.

Written and audited by

HyrePlumber Research Desk

Primary-source research and fact checking

We are a research desk, not a plumbing company. We read the plumbing code, the federal agency page or the manufacturer standard ourselves, and we publish the rule with the document it came from and the date we read it.

Where a number cannot be traced to a primary source, we publish the shorter page and say what we could not verify. The counts below are taken from the pages on this site.

32
source documents linked from these pages
10
government (.gov) domains among them
0
national average prices published without a source
0
plumbing jobs we perform

How this desk works

  • Primary sources only. A code rule comes from the code, a safety rule from the agency that issued it, and a product limit from the standard or the manufacturer. We do not cite an article that cites a source.
  • Every figure carries its retrieval date. Codes are amended and agency pages change. A number without the date it was read cannot be checked.
  • Fact, calculation and advice stay labeled. A quote is a quote, a HyrePlumber calculation says so, and a recommendation is marked as ours.
  • Safety before repairs. Gas, scalding water, electricity near water and sewage come first on every page where they apply. We explain what a repair involves; we do not tell you to work on a gas line.
  • We do not repair, install or inspect plumbing, and we take no payment for placement, ranking or a favorable mention.

Authorship on this site is organizational: the analysis belongs to the desk rather than to a named individual, and we do not publish credentials we do not hold. Our editorial policy sets out how we source, date and correct what we publish.

Sources & retrieval dates

Protect Your Home’s Water (testing after repair), US Environmental Protection Agency. Retrieved 2026-10-26.
Drinking water: private water systems (G2152), University of Nebraska-Lincoln Extension. Retrieved 2026-10-26.
Residential drinking water well: well components, Clemson Cooperative Extension. Retrieved 2026-10-26.

Information on this page is general and may vary by location, local plumbing code, your home and your own circumstances. It is not legal or engineering advice.

HyrePlumber is not a plumbing company: we do not repair, install or inspect plumbing, and we do not supervise or warrant plumbing work.

This page explains the work so you can judge a quote and a plumber.