HyrePlumber

HyrePlumber tools

Slab leak water loss calculator

Two meter readings with the water off, and the hours between them. The rate box is optional and nothing is stored.

50+ gal/day wasted by leaks in 9% of homes EPA WaterSense, Fix a Leak Week, retrieved 2026-09-05

The slab leak water loss calculator turns two water meter readings into gallons lost per day and per year. Gallons registered ÷ hours × 24 is the daily loss. 10 gallons in 2 hours is 120 gallons a day, about 43,800 a year. Add the per-gallon rate from your bill to price the water.

Work out the water lost

Arithmetic on your readings. Nothing is stored or emailed.

$6 per 1,000 gallons is 0.006.

— Water lost per day
— Over a year
— Water cost at your rate

What this assumed —

Water only. Not a repair price, and a moving meter does not by itself place the leak under the slab.

How to use the slab leak water loss calculator

You need the water meter, a clock and a stretch of time when nobody uses water.

  1. 1
    Turn everything off

    Every faucet, the dishwasher, washer, ice maker and the irrigation controller. A toilet that refills on its own will skew the test, so dye-test toilets first.

  2. 2
    Read the meter and note the time

    Write down the full reading and the unit printed on the dial: gallons, cubic feet or CCF.

  3. 3
    Wait, then read again

    One to two hours shows a fast leak. Overnight catches a slow one. Type both readings and the hours between them.

  4. 4
    Add your rate if you want dollars

    Use the per-gallon volumetric charge from your bill, not the fixed fee. Leave it at 0 to see gallons only.

What the result means for a suspected slab leak

A moving meter proves a leak, not where it is. Water can be leaving through a toilet, an irrigation line, the service line in the yard or a pipe under the floor. Rule out the first three before anyone talks about the slab.

Signs that point under the floor. A warm patch on the floor, the sound of running water with everything off, or damp flooring away from any fixture. A hot-side leak also wastes the energy that heated the water.

Locate before anyone digs. Leak detection uses pressure tests, acoustic listening or thermal imaging to find the spot. Ask for the finding in writing, then compare rerouting against a direct repair.

How household leaks compare, per EPA WaterSense

National figures for context. None is a measurement of your home.

9,300+gallons a year lost to leaks in the average householdEPA WaterSense
50+ gal/daywasted by leaks in 9% of homesEPA WaterSense

US Environmental Protection Agency, WaterSense, Fix a Leak Week, retrieved 2026-09-05.

Water you cannot stop is urgent

If water is coming up through the floor or a pipe has burst, close the main shut-off valve first, then call a plumber. Keep away from standing water near outlets or appliances. See plumbing emergencies.

Questions this calculator answers

How do I know if I have a slab leak?
Start with the meter test: everything off, two readings an hour or more apart. Movement means a leak after the meter. Warm spots on the floor or the sound of running water point under the slab, but leak detection confirms it.
How much water does a slab leak waste?
It depends on the size of the break and the water pressure, which is why the calculator uses your own meter readings rather than an average.
My meter reads in cubic feet. What do I do?
Pick cubic feet or CCF in the unit box. One cubic foot is 7.48 gallons and one CCF (100 cubic feet) is 748 gallons; the calculator converts for you.
Does the cost include the repair?
No. It prices the water only, at the rate you type. HyrePlumber publishes no slab leak repair prices. Damage to flooring is not in the figure either.
Can my utility credit a leak?
Some utilities adjust a bill raised by a documented, repaired leak. Keep the repair invoice and your meter readings, and ask before you pay.

Sources and methodology

Figures dated October 26, 2026. Last reviewed .

Related

Find a Local Plumber Back to the home page